Anyone got a fix for this?

 

Do you see that all the time? Frequently?

I think I saw that one time once. Haven't seen it since.

 

Everytime for 2 days.

 

Found this online:

Why is reverse braking assist unavailable?

• Make sure that all doors, liftgate and hood are closed. Drive the vehicle on a straight road for a short period. If the message remains, contact an authorized dealer.
• Make sure the cross traffic alert system is on.
• Make sure the rear parking aid system is on.
• Make sure traction control is on.
• The vehicle has sustained a rear end impact. Contact an authorized dealer to have the sensors checked for proper coverage and operation.
• An ABS, traction control or stability control event may have occurred. Reverse braking assist resumes operation when the event is complete.
• Make sure the rear view camera and 360 degree camera are not dirty or obstructed. If dirty, clean the camera. If the message still appears after cleaning the camera, wait a short time and the message should clear. If the message does not clear, contact an authorized dealer.
• Make sure there are no blocked or faulted sensors.
• You recently had your vehicle serviced, or the battery disconnected. Drive your vehicle a short distance to resume system operation.
• Reverse braking assist does not function when you connect a trailer. Operation resumes when you disconnect the trailer.

 

I get this warning every time I put my 2022 King Ranch PowerBoost in reverse. I took it in to my local dealer as the previous post mentions. They had my truck for 10 days and I still have the same exact problem. As instructed by Ford Engineering, they tried to align the rear camera, then they replaced the rear camera, then they replaced a module, then they replaced another module, then the had to update software that failed many times - all without success, problem still there. They showed me the proprietary messages between their tech and Ford Engineering acknowledging the issue and the lack of a working solution.

Everything else, to include Blue Cruise, seems to work fine. It's getting about time for me to hit the dealer up with the question of " what next now."

I'll try to post a photo of my dealer work order which should list part numbers and some hand-written DTCs.

 

I only get that when there's a trailer, a bike rack or something else on my hitch.

 

Here are photos of my dealer work order I mentioned in my previous post.

Page 2

 

Same problem.

Just turned off the system since its rather useless for me anyways.

 

One additional suggestion - please check the main 12V battery voltage - to ensure that it is above 12V at the time of error message.

 

I tried that - turned it off in settings and I still get the same dash warning and ding-dong. So, I turned it back on. One thing I haven't tried is removing the Phila Eagles hitch cover I put on, but it's not like it's something huge.