14th Gen Leveling Thread
#1
14th Gen Leveling Thread
Possible sticky?
Lets see those 2021+ trucks leveled
Please post as follows
4wd/2wd
Engine/cab/ trim and box
Leveling brand
Height achieved
Tire/wheel size
Rubbing and or crash bar removal
Lets see those 2021+ trucks leveled
Please post as follows
4wd/2wd
Engine/cab/ trim and box
Leveling brand
Height achieved
Tire/wheel size
Rubbing and or crash bar removal
Last edited by zclif2601; 05-31-2023 at 11:34 AM.
#2
Senior Member
2021 2wd
Stage 3 level
Nitto Ridge Grappler 285/70/18
Fuel Tech 18x9 +20 offset
took about 3" off crashbar, barely rubbed full turn in reverse
Stage 3 level
Nitto Ridge Grappler 285/70/18
Fuel Tech 18x9 +20 offset
took about 3" off crashbar, barely rubbed full turn in reverse
The following 3 users liked this post by Graygoose2021:
#3
This is a good idea. One suggestion would be to add engine, cab style (if no pictures) and trim. Most list this info in their signature, but some don't. The reason I suggest this is that bilstein lists different lifts based on the engine:
https://productdesk.cart.bilsteinus....-Y730A00_1.pdf
https://productdesk.cart.bilsteinus....-Y730A00_1.pdf
Last edited by AHenry014; 05-31-2023 at 10:55 AM.
The following users liked this post:
zclif2601 (05-31-2023)
The following 2 users liked this post by zebvance:
Graygoose2021 (05-31-2023),
zclif2601 (05-31-2023)
#5
This is a good idea. One suggestion would be to add engine, cab style (if no pictures) and trim. Most list this info in their signature, but some don't. The reason I suggest this is that bilstein lists different lifts based on the engine:
https://productdesk.cart.bilsteinus....-Y730A00_1.pdf
https://productdesk.cart.bilsteinus....-Y730A00_1.pdf
The following users liked this post:
AHenry014 (05-31-2023)
#6
Hey, it looks like you have a little rake in the rear, could you confirm if this is true and how much rake? Also, did you replace the rear blocks with RC blocks? What offset did you use that you get the rubbing?
#7
motofab 2.5” front only. 35x11.5 Toyo mt
The following users liked this post:
timbits588 (04-24-2024)