A few toys for the Whipple.
#2
Senior Member
Nice. Is that the pod your mounting them in? I figured you would mount them in the steering column dual pod. Also are you getting the custom Autometer gauges to match the truck?
Last edited by Brand; 12-13-2017 at 12:38 PM.
#3
AutoMeter won’t do custom work on the led backlit gauges. I tried...they flat out said they wouldn’t do it. Not even just swapping the pointers out to blue.
I’m going for a little more stealth mounting...I’m gonna use those low profile pods without the hardware in the lower corners of the dash. I test fit another single pod I had laying around there and it’s almost a perfect fit. Didn’t block my view of the other gauges at all with my height. Some 3M trim tape will definitely hold them in place there.
I’m going for a little more stealth mounting...I’m gonna use those low profile pods without the hardware in the lower corners of the dash. I test fit another single pod I had laying around there and it’s almost a perfect fit. Didn’t block my view of the other gauges at all with my height. Some 3M trim tape will definitely hold them in place there.
#4
TOTM Sept. '18
iTrader: (1)
I'm pretty sure with the 8" cluster it can be tweaked with Forscan to display boost right on the cluster. Not as easy to see depending on how & where you mount an external gauge. The label does say "Turbo".
See the post below.
https://www.f150forum.com/f123/2015-...0/#post4873898
Mike
See the post below.
https://www.f150forum.com/f123/2015-...0/#post4873898
Mike
#6
Senior Member
Yes they are