Display ethanol content on SCT/BDX/nGauge
#1
Display ethanol content on SCT/BDX/nGauge
Hi all. Quick question for the tuned E30/E50/E85 guys. What are you using to measure/display ethanol percentage on your SCT/BDX/nGauge device? Inferred PCM values or analog input from a dedicated sensor?
I built an arduino-based solution (using a GM sensor) for a Mustang which I can reuse if need be, but would prefer to use the inferred values if they are accurate.
I built an arduino-based solution (using a GM sensor) for a Mustang which I can reuse if need be, but would prefer to use the inferred values if they are accurate.
The following users liked this post:
cosway (05-02-2021)
#5
If you have a SCT device I can send you a log file that will read/display alcohol %
Attachment 557987
Attachment 557987
#6
Originally Posted by Nissankidd
I have an 18 3.5 will your file work on mine to measure Ethanol Content? If so that would be AMAZING.
#7
Trending Topics
#8
Originally Posted by rosc0w
Thanks to all for the replies.Looks good - how have you found the accuracy?
#9
Junior Member
If you have a SCT device I can send you a log file that will read/display alcohol %
Attachment 557987
Attachment 557987
#10
I had 5 star activate the PID in my E tunes
You’d be amazed the number of folks that say this requires a sensor. I think asking your tuner to “turn on the PID” is the solution with the NGauge, only required on vehicles that aren’t factory Flex Fuel.
The following users liked this post:
tjw1968 (07-25-2022)