Topic Sponsor
Maintenance Shop Keep your Ford F150 truck running strong. Discuss all things maintenance here.
Sponsored by:
Sponsored by: Innova

When to change timing chain?

Thread Tools
 
Search this Thread
 
Old May 31, 2020 | 12:58 PM
  #11  
ridgeruns's Avatar
Junior Member
 
Joined: May 2020
Posts: 5
Likes: 0
Default

Thanks all for the responses, lots of good information here.
I always enjoy the photos and captions, Steve!
Reply
Old May 31, 2020 | 01:21 PM
  #12  
ridgeruns's Avatar
Junior Member
 
Joined: May 2020
Posts: 5
Likes: 0
Default

Originally Posted by Johnny Paycheck
Keep your oil changed. Those pushrod engine chains are a lot shorter and stouter than these newer chains on the OHC engines. Nowhere near as much stretch to be had as long as you’ve got oil lubing and cooling them off. Ford wasn’t prescribing water (5w-20) back then.
Interesting, it sounds like a 5w-30 was recommended when the truck was new but a TSB changed the rec to 5w-20.
I've heard of folks running oil from 5w-20 to 10w-40 on this engine... any insight?
Reply
Old Apr 24, 2022 | 11:41 AM
  #13  
WhydIBuyAFord's Avatar
Junior Member
 
Joined: Apr 2022
Posts: 3
Likes: 1
Thumbs down

Originally Posted by toro68
With CLAssic Oldsmobiles/Ponitacs it around 80,000.
Is you father-in-law's 94 F-150 a 300 six? Or a 5.0/5.8 job?
About 10 years ago I was hearing with the 9th generation trucks it was aobut 90,000 miles for a timing gear change.
My suggestion is to replace the unit with a steel !
What the Heck motors are those...
Lets Try 4.2, 4.6, 5.4
Reply
Old May 2, 2022 | 02:26 PM
  #14  
laterongc's Avatar
5 Year Member
5 Year Member
Community Builder
Community Influencer
Liked
 
Joined: Feb 2020
Posts: 7,720
Likes: 2,201
Default

Originally Posted by WhydIBuyAFord
What the Heck motors are those...
Lets Try 4.2, 4.6, 5.4
Epic first post. Calling out an 11 year old post as though they were wrong……





Originally Posted by toro68
With CLAssic Oldsmobiles/Ponitacs it around 80,000.
Is you father-in-law's 94 F-150 a 300 six? Or a 5.0/5.8 job?
About 10 years ago I was hearing with the 9th generation trucks it was aobut 90,000 miles for a timing gear change.
My suggestion is to replace the unit with a steel !
Reply
Old Feb 12, 2023 | 10:01 AM
  #15  
EHAMILTON's Avatar
Junior Member
 
Joined: Sep 2021
Posts: 3
Likes: 0
Default Replace motor or timing chain

I have a 2005 f150 5.4 with 375,000 miles on it. No troubles. The timing chain is tapping bad and needs to replaced according to my trusted mechanic. He says I need to run it until it quits and just replace the motor because of the mileage and cost. I’m keeping the truck. A new motor ford motor is 4500 plus labor to install. A new timing chain is around 1000 plus labor to install. Any suggestions
Reply
Old Feb 12, 2023 | 01:11 PM
  #16  
BareBonesXL's Avatar
Senior Member
5 Year Member
Liked
Loved
Community Favorite
 
Joined: Nov 2017
Posts: 6,637
Likes: 1,293
From: Washington
Default

Calculate how many more miles you want out of the repair. You might get another 50,000 for the $1000 repair. Another 350,000 for the $4500 repair. Those are just guesses. One way to think about it.

Seems like your mechanic would have been suggesting the timing chain. Maybe he's expecting that the job will be end up bigger than the initial estimate.
Reply
Old Feb 12, 2023 | 01:17 PM
  #17  
laterongc's Avatar
5 Year Member
5 Year Member
Community Builder
Community Influencer
Liked
 
Joined: Feb 2020
Posts: 7,720
Likes: 2,201
Default

Originally Posted by EHAMILTON
I have a 2005 f150 5.4 with 375,000 miles on it. No troubles. The timing chain is tapping bad and needs to replaced according to my trusted mechanic. He says I need to run it until it quits and just replace the motor because of the mileage and cost. I’m keeping the truck. A new motor ford motor is 4500 plus labor to install. A new timing chain is around 1000 plus labor to install. Any suggestions
If you are going to do a complete/proper timing job with all related parts (and if you use best parts) I don’t see how $1k is realistic. Also, lots and lots of people have done proper/complete timing jobs (diyers and by pros at shops) only to have troubles afterwards. Typically no strong recourse if/when that happens. A quality/reputable reman will have warranty recourse.

if i were in your situation, I’d do everything I could to prolong life if existing motor, then either sell truck as is and move on, OR get s reman from reputable source. Good luck.
Reply




All times are GMT -4. The time now is 11:04 PM.