Hello, I have 2019 f150 4x4 5.0 I’m replacing front wheel hub bearing assembly’s. Does anyone have a link or the torque specs for the axle shaft nut and the 4 hub bolts. Thank you

 

Hub bolts are 129ft/lbs
Spindle nut is 27-30ft/lbs

 

Thank you. I found a few videos they were going 150 on bolts and 20 on axle nut

 

Those specs I gave you, came right from the shop manual. Always pays to ask on a forum like this.
Some very good videos I've found to be spot on are in this link, he's got a buttload of them, and he's not a shadetree kid either. I've used some of his videos myself, you may have to look for few minutes, but he just might have a video on replacing the hub. It would take me awhile to type everything out, but if I have to, I will.
https://www.google.com/search?q=ford...hrome&ie=UTF-8

 

Thanks again I will follow your post. Can’t believe 40 thousand miles and bag bearings

 

Ya, these things seem to be luck of the draw, I did 58K miles on my '12, and never any trouble.
Here's Makuloco's video on the bearing replacement, I see he used 150, and 20ft/lbs. That may have been just the year he was working on, but everything else is good.