PCV valve hard line that goes behind intake broke.
11-10-2014, 11:03 AM
#1
Junior Member
Thread Starter
Join Date: Sep 2013
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
PCV valve hard line that goes behind intake broke.
Just wondering if anyone has a part number of a high temp vacuum line that will fit on the hard plastic line that runs behind the intake and connects at the split above the PVC valve?
I purchased a two hose kit from a part number someone had here, but the line will not fit properly over the hard plastic line, and thought that perhaps someone had found a hose that would connect to the 3 way splitter and the hard line together?
I use the largest of the two hoses in the kit I bought, but when sliding it over the hard plastic line it began to crack from being too small of a diameter. Didn't know if anyone had to repair theirs as the entire line replacement system is $90.00, but could be cured by the right sized vacuum line. This is on the 5.4L Triton V8.
Thx!
I purchased a two hose kit from a part number someone had here, but the line will not fit properly over the hard plastic line, and thought that perhaps someone had found a hose that would connect to the 3 way splitter and the hard line together?
I use the largest of the two hoses in the kit I bought, but when sliding it over the hard plastic line it began to crack from being too small of a diameter. Didn't know if anyone had to repair theirs as the entire line replacement system is $90.00, but could be cured by the right sized vacuum line. This is on the 5.4L Triton V8.
Thx!
Last edited by vandall01; 11-10-2014 at 11:23 AM.
