Topic Sponsor
Maintenance Shop Keep your Ford F150 truck running strong. Discuss all things maintenance here.

help...Replace cam phasers now have p0720

Thread Tools
 
Search this Thread
 
Old 01-31-2012, 04:26 PM
  #1  
Junior Member
Thread Starter
 
dking's Avatar
 
Join Date: Jan 2012
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default help...Replace cam phasers now have p0720

Hello to all... Im new to this site,So go eASY ON ME.I have A 04 f150 4x4 with the 5.4. The engine was making a bunch of noise so i replaced the cam phasers.The noise is all gone and the engine runs great,Till I drive it about a block. The wrench light comes on then o/d starts flashing and a check engine light.I scan it and i have a p0720 oss sensor malfunction.I have done all i know to do, plz help if yall can.I have went over all my wires, nothing messed up.I ohm both the oss wires, no break in the wire. The only thing i saw was the wireing inside the tranny that connects to the truck harness had some atf in the connector.I cleaned it up expecting results, Nothing.So thats where i am and now stuck.....ThANKS to ALL



Quick Reply: help...Replace cam phasers now have p0720



All times are GMT -4. The time now is 06:30 PM.