Topic Sponsor
Maintenance Shop Keep your Ford F150 truck running strong. Discuss all things maintenance here.
Sponsored by:
Sponsored by: Innova

Help with cable on fuse Block

Thread Tools
 
Search this Thread
 
Old Mar 20, 2022 | 11:19 PM
  #1  
GordoF150's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2022
Posts: 2
Likes: 0
Default Help with cable on fuse Block

I need help with my 2005 F150 FX4 w/ 5.4 3v identifying the cable that attaches to the bottom right side of the fuse box (C270G but not sure), connector has six positions but only four are used, can anyone tell me what signal/power dose this cable supply and where to. I have the factory schematics but cant find that connector. any help would definitely be appreciated.

Thanks
Mike
Reply
Old Mar 21, 2022 | 05:39 AM
  #2  
Jimboy's Avatar
5 Year Member
5 Year Member
Liked
Loved
Community Favorite
 
Joined: Dec 2018
Posts: 4,443
Likes: 1,190
From: Ocean Springs MS
Default

Please provide a photo so that your issue can be addressed. What color/color and what size in relation to other wires?
Reply
Old Mar 21, 2022 | 10:21 AM
  #3  
ProjectSHO89's Avatar
5 Year Member
Veteran: Army
5 Year Member
Photogenic
Photoriffic
 
Joined: May 2019
Posts: 3,751
Likes: 1,117
Default

No photo needed. Here you go.


Reply
Old Aug 3, 2022 | 08:25 PM
  #4  
rocxylemmon's Avatar
Junior Member
 
Joined: May 2018
Posts: 16
Likes: 1
Default

Originally Posted by GordoF150
I need help with my 2005 F150 FX4 w/ 5.4 3v identifying the cable that attaches to the bottom right side of the fuse box (C270G but not sure), connector has six positions but only four are used, can anyone tell me what signal/power dose this cable supply and where to. I have the factory schematics but cant find that connector. any help would definitely be appreciated.

Thanks
Mike
This wire is always hot only in start and run that is connected to the ignition switch, I used this wire to tap in to for my power wire to the compass under my rear view mirror. anyone that wants to know where they ran this wire, it is on passenger door frame by windshield and is white wire with light blue stripe and is positive wire think it is pin 3 on the compass connector and negative is black with light blue stripe (pin 4). I cut this pin 3 wire at the door frame in the window area and ran my own wire to that pin 3 wire your talking about at (CJB) so when I put my key in and turn it to run the compass comes on but the dash don't show me the messenger window for the compass until it is started.

Worked like a charm! now I don't have 2 dashes (--) showing in the compass spot of my dash..LOL!

Last edited by rocxylemmon; Aug 3, 2022 at 08:40 PM. Reason: wrong pin info
Reply




All times are GMT -4. The time now is 08:48 AM.