I have a 2001 Screw with a 6 inch procomp lift and a 3 inch PA body lift. My problem is in the steering. It seems with the supplied steering extension from PA, I do not have enough steering yoke coming into the adapter to keep it strong and tight and play-free. Its tight and on there, but seems to have a bit of play in there and you can definately feel in on the road. This may not be the problem, could be in the steering colomn somewhere. But Im trying to see if anyone out there has had any problems like this and where I should start to fix this. Thanks in advance.

 

I'd look first at your idler arm and then pitman arm followed by your tie rods.

 

ya thats what everyone says. everything in the steering down below is new or gone over, checked and tightened. Like i had mentioned, I believe it has to do with the steering extension. just seeing if anyone had this problem and the fix.