Bed tray / drawer
#1
Junior Member
Thread Starter
Bed tray / drawer
Built a slide out drawer / tray for the bed of my 2018 F-150.
Unistrut brackets held down by bed bolts. Unistrut mounted across bed bolt brackets. 2"x3" angle on top of unistrut.
Drawer slides mounted to 2"x3" angle.
Slides mounted to unistrut. 2"x2" angle mounted to drawer slides.
Plywood deck on top of 2"x2" angle. 5/4" x 4" wood across each end.
Some unistrut and eye bolt cargo tie downs.
Milk crates and gear bag.
Unistrut brackets held down by bed bolts. Unistrut mounted across bed bolt brackets. 2"x3" angle on top of unistrut.
Drawer slides mounted to 2"x3" angle.
Slides mounted to unistrut. 2"x2" angle mounted to drawer slides.
Plywood deck on top of 2"x2" angle. 5/4" x 4" wood across each end.
Some unistrut and eye bolt cargo tie downs.
Milk crates and gear bag.
Last edited by ErikAtTheW; 01-29-2022 at 08:46 PM.
The following 4 users liked this post by ErikAtTheW:
#3
Junior Member
Thread Starter
The following users liked this post:
jerseyglock (01-31-2022)
The following users liked this post:
ErikAtTheW (06-16-2022)
The following users liked this post:
ErikAtTheW (06-16-2022)
The following users liked this post:
ErikAtTheW (06-16-2022)