Ford F150 Forum - Community of Ford Truck Fans

Topic Sponsor
2015 - 2020 Ford F150 General discussion on the 13th generation Ford F150 truck.
Sponsored by:
Sponsored by: Worksport

Will these fit

Thread Tools
 
Search this Thread
 
Old Apr 18, 2016 | 12:48 PM
Share
  #1  
lifted ford's Avatar
lifted ford
Thread Starter
Senior Member
 
Joined: Dec 2009
Posts: 606
Likes: 49
From: Canada
Default Will these fit
Came across a super deal on tires today, Firestone Destination MT 35x12.5x20 for $287 each CDN.... I want to pull the trigger asap but afraid it won't work with my setup : 2 1/4" ready lift , rear 3" block and stock +44 20" wheels ( No Crash Bars) will these work for me? Any others running these tires?
Reply
0
Old Apr 18, 2016 | 12:52 PM
Share
  #2  
techrep's Avatar
techrep
Senior Member
15 Year Member
Veteran: Navy
iTrader: (1)
 
Joined: Jan 2009
Posts: 37,815
Likes: 2,714
From: Va. Beach, VA.
Default
should fit with a little trim of the front valance +44 offset
Reply
0
Old Apr 18, 2016 | 12:55 PM
Share
  #3  
cal128's Avatar
cal128
Senior Member
 
Joined: May 2014
Posts: 564
Likes: 63
Default
Originally Posted by lifted ford
Came across a super deal on tires today, Firestone Destination MT 35x12.5x20 for $287 each CDN.... I want to pull the trigger asap but afraid it won't work with my setup : 2 1/4" ready lift , rear 3" block and stock +44 20" wheels ( No Crash Bars) will these work for me? Any others running these tires?
They'll fit, will rub UCAs a little though. .25" spacers will fix that though. Very little trimming will be needed. No metal though
Reply
0
Old Apr 18, 2016 | 01:14 PM
Share
  #4  
lifted ford's Avatar
lifted ford
Thread Starter
Senior Member
 
Joined: Dec 2009
Posts: 606
Likes: 49
From: Canada
Default
Originally Posted by cal128
They'll fit, will rub UCAs a little though. .25" spacers will fix that though. Very little trimming will be needed. No metal though
have you done or seen this setup? Any pics available? Thanks
Reply
0
Old Apr 18, 2016 | 01:16 PM
Share
  #5  
techrep's Avatar
techrep
Senior Member
15 Year Member
Veteran: Navy
iTrader: (1)
 
Joined: Jan 2009
Posts: 37,815
Likes: 2,714
From: Va. Beach, VA.
Default
I think you will be fine with the UCA clearance with the stock offset wheel.
Reply
0
Old Apr 18, 2016 | 01:33 PM
Share
  #6  
lifted ford's Avatar
lifted ford
Thread Starter
Senior Member
 
Joined: Dec 2009
Posts: 606
Likes: 49
From: Canada
Default
Kool... What setup are you running?
Reply
0
Old Apr 18, 2016 | 01:48 PM
Share
  #7  
cal128's Avatar
cal128
Senior Member
 
Joined: May 2014
Posts: 564
Likes: 63
Default
Originally Posted by lifted ford
have you done or seen this setup? Any pics available? Thanks
I have a 2012, ran 35s in stock 20s and rubbed the UCAs only a little
Reply
0

Trending Topics

Old Apr 18, 2016 | 01:52 PM
Share
  #8  
techrep's Avatar
techrep
Senior Member
15 Year Member
Veteran: Navy
iTrader: (1)
 
Joined: Jan 2009
Posts: 37,815
Likes: 2,714
From: Va. Beach, VA.
Default
what bran of 35's.. some 12.50 actually measure 13.4 wide like trail grapplers.
Reply
0
Old Apr 18, 2016 | 02:45 PM
Share
  #9  
Beach Truck's Avatar
Beach Truck
Senior Member
15 Year Member
Photogenic
Photoriffic
Shutterbug
 
Joined: Apr 2011
Posts: 134
Likes: 61
From: Bath NC Home. Greenville NC work.
Default my 35/12.50s
I'm running 35/12.50x20s nitto trail grapplers. XD Hoss +18 off set. 2.5 Rough country front blocks in the rear. No scrubbing but I did trim the crash bars.
Attached Thumbnails Will these fit-new-truck-after-tires-004.jpg  
Reply
0
Old Apr 18, 2016 | 03:08 PM
Share
  #10  
lifted ford's Avatar
lifted ford
Thread Starter
Senior Member
 
Joined: Dec 2009
Posts: 606
Likes: 49
From: Canada
Default
Originally Posted by techrep
what bran of 35's.. some 12.50 actually measure 13.4 wide like trail grapplers.
Firestone destination MT
Reply
0



Advanced Search

All times are GMT -4. The time now is 12:57 PM.