When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Finally finished my headlight retrofit and tried to mount the HID wiring harness but 2.7L doesn't really have any usable mounting locations.
Morimoto instructions say to put it on the passenger side, but the only places to put it and still reach the drivers side seem to be this circled area.
Has anyone found a good spot for this harness or did you have to drill out a new spot?
I used double sided tape and mounted mine to the bumper bracket. Its been there in 115 degree weather, and freezing temps and still holding strong after about a year. You could probably also mount it against the radiator support, closest to the battery. Just make sure you wipe the area down well with some rubbing alcohol if you used the double sided tape.
I used double sided tape and mounted mine to the bumper bracket. Its been there in 115 degree weather, and freezing temps and still holding strong after about a year. You could probably also mount it against the radiator support, closest to the battery. Just make sure you wipe the area down well with some rubbing alcohol if you used the double sided tape.
Nice, I hadn't thought of that. So just on a bracket down here then? And you just ran the wiring along the bumper I take it?
02-09-2019, 10:32 PM
Where Should I Mount My HID Wiring Harnes
