Ok I'm seeing all kinds info bout installing but I cant figure out which wire to tap on the tail light for the turn signal. I have the bar grounded and the run stop hooked up. when I tap one the wires I get error messages on the dash
if some one gave show me a simple picture or something showing which one to tap in to


I have 2016 XLT

 

Is this the round led light, on the handle trim, to the right? I believe its pnp, if you have a bu cam.

 

If this is what you are looking for - here is my detailed post of my install and the wires I tapped:

https://www.f150forum.com/f118/how-w...-strip-339373/

 

Ok guys I called my local truck place where I buy some my stuff from and I asked them about the dash always saying that I have a trailer connected when all I have is the light bar hard wired in to the 7 pin. They said that ford has told them not to run anything from your tail lights because they don't have enough power to support anything else. So here is a pic of how you have bypass that message on your dash.

 

I know this is an old post... but will this fix the issues with installing an LED tailgate light bar when you have LED tail lights with BLIS? I have a 2016 F150 if that matters.