When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I just removed my tail lights to see about putting in LED bulbs, but it looks like I may already of LED factory systems. There was only 1 plug going into the tail light, with no individual bulbs.
Here is a picture of my tail lights with the BLIS system...........are those LED?
Thanks
Only one connection and I can't open it...
Do I have to replace the entire light and not just the bulb?
Only one connection and I can't open it...
Do I have to replace the entire light and not just the bulb?
This is an OE LED taillamp with BLIS. There are no bulbs to replace. If it is not working and it is getting power, then you have to replace the entire light assembly. The BLIS module can be removed and installed in the new one. These are not cheap so you need to make sure it is the lamp assembly that is not working and not an issue with the BCM.
You should scan for BCM DTCs using FORScan or a diagnostic scan tool to make sure the problem is not in the BCM as the BCM controls the lights.
So I can't replace my tail light bulb?
