Topic Sponsor
2015 - 2020 Ford F150 General discussion on the 13th generation Ford F150 truck.
Sponsored by:
Sponsored by: Worksport

Running Boards

Thread Tools
 
Search this Thread
 
Old Feb 23, 2020 | 05:03 PM
  #1  
Turbotim2's Avatar
Thread Starter
5 Year Member
5 Year Member
 
Joined: Mar 2019
Posts: 26
Likes: 5
From: Maine
Default Running Boards

2018 XLT 302A 2.7L 21k miles

I have had this just over a year and Ford just replaced the driver side running board due to rust and now the passenger side looks ready for replacement. They are the chrome steps. I keep this truck very clean (as clean as possible for Maine). Is this something that other people are seeing as well?
Reply
Old Feb 23, 2020 | 05:21 PM
  #2  
mtech's Avatar
Senior Member
10 Year Member
Liked
Loved
Community Favorite
 
Joined: Sep 2011
Posts: 485
Likes: 204
From: Upstate NY
Default

Dealer replaced my 18' chrome driver side running board too under warranty. It was bubbling up. The lariat trim running board is chintzy compared to xlt running board. Long story short, the dealer put on the wrong running board and I drove around with the XLT one for a week. I noticed that the XLT running board never creaks when I step on it. Both of my lariat running boards do.They all will likely look like crap in short order... this is fake painted on chrome.

Last edited by mtech; Feb 23, 2020 at 05:28 PM.
Reply
Old Feb 23, 2020 | 05:32 PM
  #3  
nygiantFan's Avatar
5 Year Member
5 Year Member
 
Joined: Oct 2017
Posts: 41
Likes: 20
Default

i pull my chrome set off in the fall and install the painted grey ones that have been selling on ebay and in the spring, the chrome goes back on, just 4 bolts on each.
Reply
Old Feb 23, 2020 | 05:46 PM
  #4  
Metacortex's Avatar
Senior Member
 
Joined: Jul 2019
Posts: 536
Likes: 102
Default

Yes my 2016 were starting to rust pit and peel. I took them off, sold them, and bought some OEM magnetic running boards from Ebay so I wouldn't have to deal with that anymore. I actually made $10 out of the deal and the magnetic color look a lot better than the chrome.
Reply
Old Feb 23, 2020 | 06:39 PM
  #5  
Mike Up's Avatar
5 Year Member
10 Year Member
Liked
Community Favorite
 
Joined: Mar 2011
Posts: 3,086
Likes: 552
Default

Originally Posted by Turbotim2
2018 XLT 302A 2.7L 21k miles

I have had this just over a year and Ford just replaced the driver side running board due to rust and now the passenger side looks ready for replacement. They are the chrome steps. I keep this truck very clean (as clean as possible for Maine). Is this something that other people are seeing as well?
My 2012 Chrome Package side steps corroded and scratched badly. I haven't had a truck with the chrome package since. I'd rather have a 301a without chrome and why my last '16 was the 301a package. On new '19 and 302a package, I went to the Sport Package to keep from getting that junky chrome plating in the chrome package besides the console shifter and other sporty upgrades.

Maybe getting a nice silver powder coated side step would match the chrome package okay and would not corrode or rust.

Good luck.

Last edited by Mike Up; Feb 23, 2020 at 06:45 PM.
Reply
Old Feb 23, 2020 | 10:48 PM
  #6  
Fx4gary's Avatar
Senior Member
 
Joined: Jan 2016
Posts: 451
Likes: 120
From: Eastern Pa
Default

I went with stainless steel running boards on my 15. I live in Pa and they salt the crap out of the roads in the winter. 4 years later rhey look like new. See description below for info. Mine were made by Tyger.
Reply




All times are GMT -4. The time now is 08:57 PM.