When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Mine is a 2015 xlt. I added the caribou two-tone, added king ranch style bumper covers, and added the flares. I also switched to painted rear bumpers. There is a thin gold pin stripe between the two colors. Wife chose ruby red and i love it now. I just finished all my mods this week.
Mine is a 2015 xlt. I added the caribou two-tone, added king ranch style bumper covers, and added the flares. I also switched to painted rear bumpers. There is a thin gold pin stripe between the two colors. Wife chose ruby red and i love it now. I just finished all my mods this week.
Looks good. What size lift are you running, and tire size?
I have done exactly that. I modified the bumper to fit the end caps. I cut all the tabs off the plastic end caps and used double sided tape. If I were to do it again, I would get the right bumper or drill out all the little holes necessary to make the cover snap on. At the very least, you'll have to cut about two inches off of the bumper ends to make it fit. It's best if you cut the foglights opening in the bumper about a half in wider all the way around. 3M double sided tape is very thin. There are parts of mine where the tape doesn't touch the bumper so it doesn't stick. All in all, I think it turned out great. Parts are about $90 per side plus paint.
Maxtrac's 7/4 kit with 20x10 -12mm wheels on Toyo R/T 275/65R20 (34x11) tires
Ahh, so you are in a 2x4. Had not seen that kit before. I love the PTM fender flares. I have had them in the past on a old F150 and your truck helped me confirm I will probably go back with them if/ when I lift mine. Thanks for the info.
