Roof seam seal.
11-12-2016, 09:25 PM
#1
Member
Thread Starter
Roof seam seal.
The paint where you can see the grey was cracked. Touched it up today with clear to keep it from pealing.
Just sharing with everyone. 1 out of 3 16' models on the lot looked the same as my 15. It's right at the edge of the front window on the seam seal as it goes behind the glass . Both sides look the same, other side not quite as bad. I assume this is from the factory where it expanded and contracted drying. Hopefully it don't go no further. I'd rather do anything than have glasses and everything ripped out to paint.
Just sharing with everyone. 1 out of 3 16' models on the lot looked the same as my 15. It's right at the edge of the front window on the seam seal as it goes behind the glass . Both sides look the same, other side not quite as bad. I assume this is from the factory where it expanded and contracted drying. Hopefully it don't go no further. I'd rather do anything than have glasses and everything ripped out to paint.
The following users liked this post:
mikead150 (11-12-2016)
11-13-2016, 11:27 AM
#4
The seam on the passenger side of my truck has small bubbles in the paint along the outside edge however the drivers side is perfect.. I haven't seen any missing paint by the windshield though.
The following users liked this post:
mikead150 (11-13-2016)
11-13-2016, 11:48 AM
#5
Member
Thread Starter
Very crazy. I'm sure they would fix. But it's not noticeable unless standing on rails to look. Scares me how much more trouble I would have by ripping out windshield. My roof has several dust spots in paint. But no bare metal. As long as it don't peel I can deal with .
