Retrofit 2017 F-250 Aux Switch Panel in F-150
#542
Just Another Member
Basically tie together C9120 Connector Pin 11, the wire from fuse 113 and C315 Connector Pin 12. I made this splice under the hood, right next to the relay box.
Hope this helps.
The following users liked this post:
starliner57 (10-30-2017)
#543
Just picked up my 17 XLT SE Supercab a week and a half ago and absolutely love it. For the week plus of ownership ive read through this thread several times and have spent countless hours researching and searching for what I need. I guess that a black overhead console on a super cab with sunroof and rear slider is a rare combo? All the black ones I find are for a crew cab with sunroof so it has the additional buttons for the power shade. Ive already accepted the fact that ill have to get one with the motion sensors even though I dont have them. Was hoping I could find this part myself but Im loosing hope. Any of you have suggestions or part numbers?
#545
So I just heard back from a dealer who has ,what I can only imagine, one of the few Super Cab 2017 raptors with sunroof and power sliding rear. It has this overhead console:
Tasca found the part number, using the vin from that truck to be: HL3Z-28519A58-KB
Im ordering it now so i will confirm this (I hope).
Also ordering pigtail part# WPT-1125
Tasca found the part number, using the vin from that truck to be: HL3Z-28519A58-KB
Im ordering it now so i will confirm this (I hope).
Also ordering pigtail part# WPT-1125
Last edited by nnuzzo141; 10-31-2017 at 12:42 PM. Reason: typo
The following 2 users liked this post by nnuzzo141:
2016Limited (01-08-2018),
melon16 (11-08-2017)
#546
Senior Member
Ok I got this hooked up today and it does not work when I move any of the upfitter switches all the switch lights come on orange and the switch i moved does not turn on the item i have hooked up any ideas
#547
Senior Member
I think I saw something similar when I was trying mine on the bench. I’m pretty sure you have a wiring error.
Where did you tap into for the backlight wire (violet color I think)?
Where did you tap into for the backlight wire (violet color I think)?
#548
Got this done in my 2017 screw. Have my rough country LED grille hooked up to it and have 5 more things to hook up so it's worth the investment. Big huge props to the guy who made the pdf write up, the only thing I did different was use zip ties instead of making a mount for the fuse relay box. Took me about 5 hours from opening packages to flipping on the switch for the first time... I have 0 wiring experience.
** edit
and as a subtle jab... I was able to get those expendable pillar pieces out without breaking them
** edit
and as a subtle jab... I was able to get those expendable pillar pieces out without breaking them
Last edited by grayjaxx; 11-04-2017 at 07:06 PM.
#549
Senior Member
I have the violet/grey wire for the blue lighting connected to pin 10 on connector c930 i have triple checked the wiring and its ok . If i put power to the green orange wire with the plug at the relay box disconnected the switch lights work correctly only the switch you move torns orange. As soon as I plug the two together the switches will all turn orange with any one switch moved i'm stumped