I installed the front motofab 2" level kit to the front wheels. Looks awesome but I didn't realize that the 2WD doesn't have a blocks in the rear so the truck is doing a wheelie. For whatever reason I thought it had 1.25" block installed from the factory. winning...

I still want a little rake so I ordered 2" blocks and bolts for the rear.

My questions are.

1- I got an alignment with the front level, when I do the rear do I need to do it again? Hoping that maybe since the back is much simpler in design that it may be a non issue.
2 - do i need a new shock with a 2" rear lift? Sounds like the factory shock will work with 2" but its right on the limit. Whats an inexpensive shock that would work for this?

Thanks!

 

No alignment in the rear ever.

Factory shocks should be fine. You could go out and pull one off, see how much room you have. Measure installed and then fully extended. Subtract 2” for the level and make sure you have some distance left for droop.

 

Thanks for the feedback!

 

Yea, we are gonna need pics

 

This weekend for sure, I get the blocks tomorrow and should have everything done by friday!