Topic Sponsor
2015 - 2020 Ford F150 General discussion on the 13th generation Ford F150 truck.
Sponsored by:
Sponsored by: Worksport

Programming home link without Learn Button

Thread Tools
 
Search this Thread
 
Old Mar 30, 2015 | 06:10 PM
  #11  
GeorgeCS's Avatar
Junior Member
 
Joined: Mar 2015
Posts: 17
Likes: 4
From: South Texas
Default

Actually the book on the 2015 F150 page 151 says hold it close till you get the fast flash. Mine never gets to fast flash
Reply
Old Nov 9, 2015 | 08:38 PM
  #12  
hotfx2's Avatar
Member
 
Joined: May 2010
Posts: 83
Likes: 3
Default

homelink makes a repeater module you need to buy
Reply
Old Nov 9, 2015 | 08:48 PM
  #13  
Minuteman3's Avatar
5 Year Member
15 Year Member
 
Joined: Oct 2007
Posts: 133
Likes: 30
From: Tacoma, WA
Default

I've been trying to get mine to work for two weeks now with no success. Took it to the dealer but they said it checked out fine.

I have a Chamberlain opener and their tech support did admit they have been having troubles with new 150's.

In my case, the light flashes as if trained but it doesn't work. Tried learning mode on the opener to no avail.

My previous '14 Ram and our 11 SAAB both work fine.

Think I'll try to call Ford CS and see what they say.

Other than this, our truck seems to be 100% perfect!!

Ken
Reply
Old Nov 9, 2015 | 08:49 PM
  #14  
Minuteman3's Avatar
5 Year Member
15 Year Member
 
Joined: Oct 2007
Posts: 133
Likes: 30
From: Tacoma, WA
Default

Originally Posted by hotfx2
homelink makes a repeater module you need to buy
Link? Haven't seen one.

Ken
Reply
Old Mar 4, 2018 | 11:29 AM
  #15  
jmufnman's Avatar
Junior Member
 
Joined: Nov 2017
Posts: 1
Likes: 0
Default Got the Homelink to work

My son just bought a 2013 F-150 and I tried to program the homelink but just couldn't.
This is what I did to get it to work.
First, I have an old craftsman garage door opener with gray buttons.
What worked for me was:
Clearing all codes by pressing both outside buttons on the Homelink to erase any codes.
Then, I pressed the green learn button on the garage door unit.
I went to the truck and pressed the button that he wanted to associate to that door, while holding that button in I then pressed the button on the remote that operates the opener. It cycled. (I never let go of either button until the door was all the way up.)
I then pressed the homelink button I wanted programed and the door came down!

Hope this helps!
Reply




All times are GMT -4. The time now is 05:55 PM.