Offset with 35's??
I have a 2015 F150 with a 2 1/4" front level and I am getting a set of 35x12.5x20 toyo MT and looking at getting a set of fuel wheels also but what is the lowest offset I can run with these options? Any pics of others current setups would help also Thanks
Get ready to modify (cut, remove, spread, swap, etc) your crash bars.
I'm running a 1.5" level up front, 35x11.50x20 Ridge Grapplers on 20x9.5" wheels with +25 offset.
Going over angled driveways too quickly, or going reverse on any angled surface will give me a little bit of rub, even after hammering my crash bars (gave me about 1/4" extra space).
If you're looking for a 1" wider tire (mine are 11.5" wide), you're most certainly going to need crash bar work to avoid rubbing with lower offsets than mine.
I'm running a 1.5" level up front, 35x11.50x20 Ridge Grapplers on 20x9.5" wheels with +25 offset.
Going over angled driveways too quickly, or going reverse on any angled surface will give me a little bit of rub, even after hammering my crash bars (gave me about 1/4" extra space).
If you're looking for a 1" wider tire (mine are 11.5" wide), you're most certainly going to need crash bar work to avoid rubbing with lower offsets than mine.
It's not just the crash bars.. you guys will need to trim plastic and some aluminum to squeeze a negative offset with just a level and 35s. If you don't like hacking your truck eithe run a smaller tire or less aggressive offset.






