Topic Sponsor
2015 - 2020 Ford F150 General discussion on the 13th generation Ford F150 truck.
Sponsored by:
Sponsored by: Worksport

Now This Is Embarassing!!

Thread Tools
 
Search this Thread
 
Old May 2, 2016 | 08:02 PM
  #1  
All Hat No Cattle's Avatar
Thread Starter
Senior Member
 
Joined: Jul 2009
Posts: 3,337
Likes: 1,001
From: Lost Wages
Default Now This Is Embarassing!!

So Sirius sends me a welcome letter with a nice handout listing all their stations.

I take it to the truck and program my stations, then neatly fold the handout and tuck it into the space where the white paper is in the photo, for future use.

Then I decide to uncover the cubby under the white paper, without removing the handout. Not one of my best rocket scientist moves, lol.

The dash ate that Sirius paperwork and refuses to give it up. I pulled out the glovebox, no help. Went under the left footwell with an inspection mirror, no access.

So, my question. Has anyone ever removed the vertical trim piece on the right side of the center stack? The piece with the A/C vent and the Power panel?

Does it just pop out with tabs, or are there screws involved? I have a plastic trim removal set, but first-hand experience is still the best.

Thanks in advance.
Attached Thumbnails Now This Is Embarassing!!-p1010029-large-.jpg  
Reply
Old May 2, 2016 | 08:19 PM
  #2  
MGD's Avatar
MGD
former member
 
Joined: Jan 2014
Posts: 3,092
Likes: 857
Default

Lol.

https://www.f150forum.com/f118/inter...emoval-331970/


MGD
Reply
Old May 2, 2016 | 08:22 PM
  #3  
loganiceto's Avatar
Junior Member
 
Joined: Jun 2015
Posts: 11
Likes: 1
Default

Screws are involved and lots of clips. If I remember correctly, the top tray and speaker up top has to be removed before the vertical pieces can come loose. I took apart my dash for the heck of it one day. Not sure if you can get access to the are you want through the vertical piece.
Reply
Old May 2, 2016 | 08:24 PM
  #4  
loganiceto's Avatar
Junior Member
 
Joined: Jun 2015
Posts: 11
Likes: 1
Default

Haha that is a lot better, we must have been writing at the same time. Mine, as you can see doesn't have the floor console. So I guess you get one of each
Reply
Old May 2, 2016 | 08:27 PM
  #5  
MGD's Avatar
MGD
former member
 
Joined: Jan 2014
Posts: 3,092
Likes: 857
Default

Originally Posted by loganiceto
Haha that is a lot better, we must have been writing at the same time. Mine, as you can see doesn't have the floor console. So I guess you get one of each
LMFAO !!! Great minds, and all of that

Cheers!
MGD
Reply
Old May 2, 2016 | 08:43 PM
  #6  
nra4ever's Avatar
Senior Member
10 Year Member
 
Joined: Aug 2014
Posts: 213
Likes: 54
Default

Might be easier to just get a new one.
Reply
Old May 2, 2016 | 08:52 PM
  #7  
loganiceto's Avatar
Junior Member
 
Joined: Jun 2015
Posts: 11
Likes: 1
Default

Originally Posted by nra4ever
Might be easier to just get a new one.
Lmao
Reply
Old May 2, 2016 | 09:04 PM
  #8  
Scott91370's Avatar
Trying to figure it out!
10 Year Member
Liked
Loved
Community Favorite
 
Joined: Jan 2016
Posts: 2,992
Likes: 921
From: Ft Worth, Texas
Default

I lost a socket and adapter down there. These trucks will eat anything!
Reply
Old May 2, 2016 | 10:41 PM
  #9  
All Hat No Cattle's Avatar
Thread Starter
Senior Member
 
Joined: Jul 2009
Posts: 3,337
Likes: 1,001
From: Lost Wages
Default

Thanks guys, that's why this is my favorite forum.

I'll give it a shot tomorrow.
Reply
Old May 4, 2016 | 11:42 AM
  #10  
#1Kidder's Avatar
Senior Member
 
Joined: Nov 2015
Posts: 341
Likes: 103
Default

Also thanks, mine ate a $25 gift cert and haven't had time to figure it out
Reply



All times are GMT -4. The time now is 12:08 AM.