New BdyCM programing questions.
Howdie, y'all. This is my first post here. Water ran down my A-post, and it got my BCM. The whole truck went crazy, so I pulled the codes with FORScan, and they were all BCM-related. Took the entire front apart, found the water infiltration areas, and sealed with RVT. I'm way out in the country so I decided to swap the BCM myself instead of towing it to a shop. I downloaded the BdyCM asbuilts, installed the new BCM, and rewrote the BdyCM Module configuration (AS BUILT format). I know I need a locksmith to reset the PATS for the keys. I just have a few DTC codes I'm not sure of. Could someone decipher if I've missed something:
These are the main DTC codes I'm worried about. I'm not including a few more for TPMS, PAM sensors, etc.PAM
Code: U2100 - Initial Configuration Not Complete
Status (-2B):
- DTC Present at Time of Request
- Malfunction Indicator Lamp is Off for this DTC
Module: Parking Aid Module
BdyCM
Code: U2100 - Initial Configuration Not Complete
Status (-8A):
- DTC Present at Time of Request
- Malfunction Indicator Lamp is On for this DTC
Module: Body Control Module
BdyCM
Code: B10DA - PATS Target Identifier
Additional Fault Symptom (:51):
- Not Programmed
Status (-0A):
- DTC Present at Time of Request
- Malfunction Indicator Lamp is Off for this DTC
Module: Body Control Module
BdyCM
Code: U2101 - Control Module Configuration Incompatible
Status (-0A):
- DTC Present at Time of Request
- Malfunction Indicator Lamp is Off for this DTC
Module: Body Control Module
BdyCM
Code: B10D7 - PATS Key
Additional Fault Symptom (:55):
- Not Configured
Status (-0A):
- DTC Present at Time of Request
- Malfunction Indicator Lamp is Off for this DTC
Module: Body Control Module
BdyCM
Code: B1182 - Tire Pressure Monitoring System
Additional Fault Symptom (:55):
- Not Configured
Status (-8A):
- DTC Present at Time of Request
- Malfunction Indicator Lamp is On for this DTC
Module: Body Control Modul
I'm unsure if I'm ready to call the locksmith or if I missed something. Any help would be appreciated!
These are the main DTC codes I'm worried about. I'm not including a few more for TPMS, PAM sensors, etc.PAM
Code: U2100 - Initial Configuration Not Complete
Status (-2B):
- DTC Present at Time of Request
- Malfunction Indicator Lamp is Off for this DTC
Module: Parking Aid Module
BdyCM
Code: U2100 - Initial Configuration Not Complete
Status (-8A):
- DTC Present at Time of Request
- Malfunction Indicator Lamp is On for this DTC
Module: Body Control Module
BdyCM
Code: B10DA - PATS Target Identifier
Additional Fault Symptom (:51):
- Not Programmed
Status (-0A):
- DTC Present at Time of Request
- Malfunction Indicator Lamp is Off for this DTC
Module: Body Control Module
BdyCM
Code: U2101 - Control Module Configuration Incompatible
Status (-0A):
- DTC Present at Time of Request
- Malfunction Indicator Lamp is Off for this DTC
Module: Body Control Module
BdyCM
Code: B10D7 - PATS Key
Additional Fault Symptom (:55):
- Not Configured
Status (-0A):
- DTC Present at Time of Request
- Malfunction Indicator Lamp is Off for this DTC
Module: Body Control Module
BdyCM
Code: B1182 - Tire Pressure Monitoring System
Additional Fault Symptom (:55):
- Not Configured
Status (-8A):
- DTC Present at Time of Request
- Malfunction Indicator Lamp is On for this DTC
Module: Body Control Modul
I'm unsure if I'm ready to call the locksmith or if I missed something. Any help would be appreciated!


