I'm adding LEDs to truck and decided upon adding switches in the cubby underneath the radio / hvac stack. I saw the area where the key fob goes if it goes dead or for storage and thought I don't use that I can bring the wires through there, plus I could cover it up with the factory cover. I started to drill a hole and noticed it wasn't hollow underneath that area. There is a sensor there that detects if the key fob is in the truck. I did not drill all the way through the sensor. It looks like it had a copper cover around and it and I broke through that. Now in order for me to drive the vehicle I have to place the fob in the cubby, I can't leave it in my pocket as before. Does anyone know the part number for the sensor and / or how to get to the sensor? I took apart most of the center console and couldn't figure out how to access it.
2016 Lariat

 

I have the cubby part number now (KL3Z-1504608-BA) but I can't find a diagram that shows the wiring underneath it. Any help would be greatly appreciated.