When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
My build - 157" with Level, 35x12.5x20 and 1.5" spacers
Just thought I'd post my build for those who might be interested. It's super dirty in these pics but I am happy with the final stance, so I wanted to post it.
Here's what it is:
2016 lithium gray special edition (removed side stripes)
Unleashed Tuning performance 93 Octane tune
Rancho QuickLifts
Rancho 9000xl in the rears
2.5" rear blocks
Cooper STT Pros - 35x12.5x20
1.5" Bora wheel spacers in the front and rear (this is comparable to about a +6 offset)
Zero rubbing in forward, reverse, steep angles, control arms, etc. I achieved this by spreading the crash bars with a spreader from harbor freight. Spread about a half inch in the front and rear crash bars. Trimmed a small piece of the fender liner in the rear. There is about a 3/4" rake from back to front.
Not trying to dog your truck, but between the wheels and that gray paint, I'd need something to help break it up (like the sticker did). The flat of the gray and the color of the wheels looks like it was all just sprayed at the same time.
Not trying to dog your truck, but between the wheels and that gray paint, I'd need something to help break it up (like the sticker did). The flat of the gray and the color of the wheels looks like it was all just sprayed at the same time.
Sticker was too much for me. Looked good in some lighting, but not in bright light. I'll be lifting the truck next year with black wheels. Should help break it up.
09-18-2016, 04:36 PM
My build - 157" with Level, 35x12.5x20 and 1.5" spacers
