Hi guys,

I'm new posting but have read a lot of posts without an account.

So I have been attempting to install Morimoto headlights on my 2019 F-150 XLT Screw. The DRLs work perfectly, as do the low and high beams. The turn signals are totally whacked though. When I had only the passenger side plugged in, the sequential was working normal. But with both sides plugged in, each one is only lighting up a few diodes (not even in the same places on the top bar). So I have a left turn signal flashing in the middle of the bar and a right flashing at the beginning of the bar. And after both were plugged in, the passenger side that was working stopped working as a full sequential even after the left side was unplugged again and I cycled through the ignition and turning lights on and off.


Any ideas what could be wrong?