Have a 2019 XLT with BLIS and Cross Traffic (canadian truck) and noticed today that there are no configuration settings in the cluster for either. It does show in the manual that there should be options to turn it off, etc. My 2016 XTL had the options. Is it possible that the factory didn't enable them in IPC or a dealer PDI wasn't done.

Both systems are working fine as far as I can tell but I just found it odd that there was nothing in the Settings section. The only 2 options I have are Pre-Collision and Advanced Settings and there is nothing in there about BLIS or Cross Traffic.

Im thinking its a goof and they should be listed.

I'll end up going to the dealer at some point or maybe try enabling though for scan.

Just wondering if anyone else has had options missing in there cluster even though the truck has it.

Thanks
Ryan S.

 

 

Pre-collision is standard on 2019's now. I was going to go the Forscan route but I'd rather hear from the dealer to see if this was actually a mistake.

I'm wondering what else I might be missing now in the IPC!

Thanks
Ryan S.

 

I am curious if you ever figured this out. I have a 2017 XTR and I also seem to be missing some settings. The main one I am missing that I am trying to figure out is that I can't disable my rear parking sensors. There is no option in the cluster. Also, when I go in reverse it doesn't show a popup that allows you to disable it.

 

They also took away the ability to disable the annoying auto door lock. The dealer has to do it.