I must apologize in advance if this has been ran across the yard a time or two. I've looked up one side of the internet and down the other and still can't find any information. All I found was the mod to have the spotlights illuminate above 5 MPH. I would like to add mirror spot lights to my '15 F150 500A Lariat. I've purchased the correct bezel, switches and control module. The wiring for the switch was already installed via factory. The control module plugs were under the dash right above the go pedal so no trouble there. Plugged everything in and still nothing is happening. What I'm wondering if I need to replace the turn signal/spotlight in the mirror. The mirrors I have are not the tow style but have power fold puddle light and are heated...non blis...all powered by the 22 pin connector. Could somebody please assist me with this? Maybe take a picture of your non tow mirror spotlights? Praying to the F150 Forum Gods....on my knees...

 

22 pin connector for mirror

 

You also need to enable Spot Lights in the BCM, 726-56-01 xxxx x1xx xxxx. Are you positive you have the spotlights in the turn signal housing? Just because you were prewired for spotlights, doesn't mean you have the actual light.

 

Thanks for the reply. The forscan code will help. The spread sheet of codes I have doesn't have a listing for the spotlights. I also found out after I posted this that I do need different turn/spotlight lights in my mirrors. Now the tough job of tracking them down. I knew there was somebody out there in the 150 Forum land that could help.