I took off the parts in the 1st picture and replaced them with PTM parts, had them professionally painted...Better this way for matching color when done at a good shop, eBay is a crap shoot but some have had excellent results. I chose the sure/safe route.

 

Husker, where did you get the PTM parts? Do you have the part numbers?

Thanks

 

Sorry, I don't have the part #s anymore. Also, I was purchasing parts from multiple places when I was getting ready to do the truck when it was delivered, Late 2016.

I used these three places at the time, check prices at all three:
https://parts.autonationfordwhitebearlake.com/
https://www.varsityfordparts.com/
https://www.sunrisefordfontana.com/order-parts/

 

There's a guy on Facebook that does them for like $170 for a set. I've seen a ton of posts that speak highly of his work and a lot of pics that prove it looks factory. I'll try to find his name or a link and get back to the thread.

 

With oxford white you could prolly find a rattle can to match. It your money to blow.

 

FL3Z-17D742-CAPTM
FL3Z-17D743-CAPTM
Those are the part #'s for anyone looking did mine on my stx oxford white

 

Do these come painted Oxford White, or are they plain and you painted them Oxford White?

 

They are primed you have to get them painted.