When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Here's my question: I have regular mirrors with blinker only. What if wanted my mirror's blinker light to simply stay on as a parking light and not blink at all. Like it got fired from it's blinker job and is now a fulltime parking light. Would that be a lot easier than what @lampy4150 did? If so, what's the easiest way for me to do that???
Here's my question: I have regular mirrors with blinker only. What if wanted my mirror's blinker light to simply stay on as a parking light and not blink at all. Like it got fired from it's blinker job and is now a fulltime parking light. Would that be a lot easier than what @lampy4150 did?
If so, what's the easiest way for me to do that???
Cut the factory wire and run a 12v keyed wire and you'd be good to go.
Which of these wires do I use? Trying to figure out which one I need to disconnect and tie into my parking light....
You would have to find a wire thats 12v key on to tap. I don't think any of those are. My connector is different so I'm not sure what you have on your plug.
First off Kudos to Lampy4150 and everyone else for doing this.
But I have got to ask the question why didn't anyone pull power from a lighted switch in the door for the power that comes on when the lights are on?
I understand wiring but very little on diodes and all.
This module would work well for what you guys are trying to do. I used these on my Anzo's to make the ambers lights work as the parking and signal lights.
11-16-2016, 05:56 AM
Simplified version
