can someone tell me the bulb sizes to change out my factory bulbs to led's? I have tried searching this and cant come up with anything for some reason. I have the Anzo headlights already with led high and low beams, but want to change all my bulbs on my truck to led's too. thanks,

 

can anyone help out with this?

 

Discover what standard bulbs you currently have and want to replace then type that number into google using the term "led replacement" and off you go......

 

Check this site. It's pretty helpful. Not always 100% accurate but a great reference:

https://www.superbrightleds.com/vehicle

 

What I've found so far in my research and quest to change all my halogens to LEDs on my 2017 XLT:

Fog Lights -> 9140
Taillights -> 3157
Reverse -> 3156
3rd Brake (high mount stop light) -> 912 (white for cargo light and Red for brake light)
License Plate -> 1035 (ordered from stage3motorsports)

You can search amazon or google like "bulb#" LED.
Hope this helps!
Another site I found for LEDs and where I am going to get the 3rd brake light kit is F150LEDS.com

Note: If you don't know; you'll need a load resistor to prevent hyper flashing if you replace any turn signal bulbs.

 

Thank everyone. I am getting my lift kit put on today, and after I get back I will work on replacing all the halogen bulbs.

 

Think the anzos use the same turn bulbs as factory.