Almost everytime i start the car the key get stuck in the upper position I attached a link for a
youtube video to see what I am talking aboht, but how do I fix that?

 

A lock smith made me an ignition only key. A lot lighter than the multi function in your video and saved further wear and tear. You might try cleaning the cylinder - spray in electric contact cleaner and cycle the key back and forth. Finish with graphite lubricant - anything oily will collect dust and dirt.

 

spray it in the key hole?

 

Yes - use the 'straw' on the spray can to get entire length/depth.

 

thank you that actually worked. I sprayed 3 in 1
lock dry lube and it’s working pretty good

 

Good news. If you are interested in a more compact key, info is on this thread:
https://www.f150forum.com/f118/how-g...sively-420965/
The company web site is here: https://aftermarket.strattec.com/product-finder
You will get the blank cut by a locksmith then there is a procedure in the owner's manual as to how to get the 'reading info' for your ECU. Some locksmiths can even do this for you now.
It would be helpful to list the year, model, engine, accessories etc. of your truck in future posts. Not sure if the above info is compatible with your year.