Rudyj07

Hey Folks,

Need some help here... Trying to avoid tampering with existing stock harness - I've seen a recent posting where someone created a jumper harness to connect the raptor grille amber light harness to the side/running light marker with Bosch EV6-M2 connectors. I am looking to do the same but when I compare the images online for the Bosch fuel injector connectors (what someone used previously in the posting I mentioned above) to what I have on my truck harness lead, they are nothing alike. Has anyone tried this? If so, what year of truck?

I have been able to track down the exact female end of the harness lead on the truck from a couple of websites and it turns out it is known as a "Horn Connector 712" or WPT-1244 connector (https://www.bmotorsports.com/shop/pr...oducts_id/4181 or https://www.autozone.com/electrical-...ector/890269_0 ) but I cannot for the life of me find a compatible male end. I also reached out to a sales rep from the website above and they have nothing to offer as well.

Can anyone shed some light on what the male end looks like? Because this is plugging directly into the running/side light marker, I assume finding a match in a raw connector form is becoming a bit impossible?!?!

Something else I stumbled across that may help others in the future for any harnessing/connector part number questions is this website - https://pictures.dealer.com/antelope...a865caeeda.pdf

tonymwinters

Hmm, I've never seen it done with those. I used a standard T Tap connector and it worked perfectly. Took like 3 minutes to do.

Rudyj07

Appreciate the response - I was going to splice and heat shrink into the existing harness at first but wanted more of a plug and play and the ability to return to stock if need be. Nonetheless, connectors should be rolling in today.