Hello Gents. I just recently did a single FOREscan change listed below. I did the common update to turn off the doo-doo-doo chime upon ignition start. This is the ONLY change I have made using FOREscan. It did correctly disable the ignition start chime, however, now ALL of my other alerts (blinker sound, backup alarm, rear cross-traffic alarm, door ajar chime, etc..) are only coming throught IPC and no longer the speakers.

Is there something I need to do to fix this? I can't imagine I have done anything wrong as I only made a single digit change. I backed up all of my modules before starting.

2020 F-150 Platinum.

Original IPC FOREscan values: 720-01-02-221F-90FB
Updated IPC FOREscan values: 720-01-02-221F-92FB

 

Change it back and see if it works again. Mine randomly plays through the speakers or switches to just the dash. I think someone posted once why it did this. Could just be coincidence.

 

I did change it back to original and the problem persists. It's very odd because it worked normal prior to this change. I had the key in the on position for quite a long time (~30 minutes) while I was backing up all the modules prior to making any changes. Perhaps I just drained the battery enough that it won't go back through the speakers until it has been driven enough to fully recharge the battery.

 

After I’ve made FORScan changes or flash a new tune file, mine almost always does this. Seems to resolve itself after a few drive cycles. No idea why it does this.

 

Thank you sir. This is exactly what happened. After a few drive cycles it just all resolved.

very weird. I wish I knew exactly why it happens.