Topic Sponsor
2015 - 2020 Ford F150 General discussion on the 13th generation Ford F150 truck.
Sponsored by:
Sponsored by: Worksport

Interior Mods

Thread Tools
 
Search this Thread
 
Old Jun 11, 2016 | 01:18 AM
  #31  
zelbon's Avatar
Junior Member
 
Joined: May 2016
Posts: 5
Likes: 0
From: West Virginia
Default

Originally Posted by superp
I have one too. Big improvement, Guns up!
I also have one. I agree it makes a big difference. Easy install as well. Have you seen the kicker vss system for our trucks? They look pretty awesome and I'm sure you'd get better sound output but it's a big jump up in price and difficulty of installation. Here's a link to it.

http://www.stage3motorsports.com/PF1...r-Amp-Kit.html
Reply
Old Jun 11, 2016 | 07:15 AM
  #32  
steinfire's Avatar
Senior Member
 
Joined: Mar 2016
Posts: 418
Likes: 200
Default

Originally Posted by Hctr154
How did you remove those stickers?
i parked in direct sunlight for an hour or so and then took my wifes hair dryer and heated the edges and started slowly peeling while I coutinued to have heat directly on it

interior tip......I keep a small microfiber cloth in each door pocket to clean off all the nasty fingerprints left on the exterior door edges. For when people and my kids get out and can't close a door without getting their paw prints all over it when they close the door. If the truck is clean I cannot stand to see the sun hitting it and everything looks great until I see what looks like finger paintings on my door edges. Maybe that is just me being OCD.
Reply
Old Jun 11, 2016 | 07:48 AM
  #33  
Hctr154's Avatar
Senior Member
 
Joined: Jan 2016
Posts: 614
Likes: 196
From: Conroe Tx
Default

Originally Posted by steinfire

i parked in direct sunlight for an hour or so and then took my wifes hair dryer and heated the edges and started slowly peeling while I coutinued to have heat directly on it

interior tip......I keep a small microfiber cloth in each door pocket to clean off all the nasty fingerprints left on the exterior door edges. For when people and my kids get out and can't close a door without getting their paw prints all over it when they close the door. If the truck is clean I cannot stand to see the sun hitting it and everything looks great until I see what looks like finger paintings on my door edges. Maybe that is just me being OCD.
Since the temps have reached the mid 90s here, think I'll give this a try today. Thanks.
Reply
Old Jun 11, 2016 | 09:15 AM
  #34  
wildcat333's Avatar
Senior Member
 
Joined: May 2016
Posts: 406
Likes: 64
From: New Hampshire, USA
Default

Originally Posted by Yycf150
Ran the wiring from the battery in through the rubber grommet under the drivers side dash. Ran them along the channels under the door sills to the back and out behind the seat. I wired the sub speaker outlets to the rear speaker wires in the B pillars. Grounded them to a bolt behind the rear seat. There's a write up on here somewhere I got the speaker colors from etc.
Thanks. How do you like it? Pics of it installed?
Reply
Old Jun 11, 2016 | 10:46 AM
  #35  
15_PLATINUM's Avatar
Senior Member
 
Joined: Apr 2016
Posts: 129
Likes: 25
Default



All I did was tint windows-fronts 20%, windshield 70% and install these pedals. Not much else you can do!
Reply
Old Jun 11, 2016 | 12:08 PM
  #36  
steinfire's Avatar
Senior Member
 
Joined: Mar 2016
Posts: 418
Likes: 200
Default

I like those pedals, where did you find them? Were they made for F150 models or are they univesal.
Reply
Old Jun 11, 2016 | 12:25 PM
  #37  
Growinupmx's Avatar
Senior Member
 
Joined: May 2016
Posts: 666
Likes: 125
From: TN
Default

Originally Posted by steinfire
I like those pedals, where did you find them? Were they made for F150 models or are they univesal.
I found these

http://www.carid.com/2016-ford-f-150-billet-pedals/

http://www.ebay.com/ulk/itm/131835725846

Last edited by Growinupmx; Jun 11, 2016 at 12:32 PM.
Reply
Old Jun 11, 2016 | 04:03 PM
  #38  
TooManyVehicles's Avatar
Senior Member
5 Year Member
Liked
Loved
Community Favorite
 
Joined: Jan 2016
Posts: 792
Likes: 207
Default

Originally Posted by Yycf150

Ran the wiring from the battery in through the rubber grommet under the drivers side dash. Ran them along the channels under the door sills to the back and out behind the seat.
I wired the sub speaker outlets to the rear speaker wires in the B pillars. Grounded them to a bolt behind the rear seat.
There's a write up on here somewhere I got the speaker colors from etc.
I have the same sub available to use that I had sitting around. Any chance that you can post some pictures of your install?
Reply
Old Jun 11, 2016 | 04:26 PM
  #39  
prpltrck150's Avatar
Junior Member
 
Joined: May 2016
Posts: 18
Likes: 1
Default

I immediately ordered the LED light trim package. Got it in Red....don't know if I'll regret that thought, but it ties in the Ruby Red from the outside. Speaking of which....Anybody know of a spray paint color that would match the Ruby Red? I have an idea...
Reply
Old Jun 11, 2016 | 06:25 PM
  #40  
15_PLATINUM's Avatar
Senior Member
 
Joined: Apr 2016
Posts: 129
Likes: 25
Default

Originally Posted by Growinupmx
I found these

http://www.carid.com/2016-ford-f-150-billet-pedals/

http://www.ebay.com/ulk/itm/131835725846
They came from Custom Corvette Accessories. Made for F-150. Had the Putco ones at first but sent them back bc they didn't match the aluminum trim.
Reply



All times are GMT -4. The time now is 11:32 AM.