HOW TO: Summers22 splash/apron mod for front wheel wells
#1
HOW TO: Summers22 splash/apron mod for front wheel wells
Wanted to share a mod with the 13th gen people that I had seen done on the 12th gens. The 09-14 guys made their own version of the ecoboost front wheel well apron/gap guards. These are NOT available from Ford separate from the front fender liners. I decided to do the same for the 15-19 trucks. I have a 2017 RWD, @sddesigns has a 2018 4x4 and @jdroller has a 2016 FX4. The liners that I made fit all 3 just fine. So I am confident they will fit all 15-19 non-eco trucks no matter the trim or drivetrain. Without help from @sddesigns and even more so from @jdroller (he scanned in the template I sent out, then emailed it to me, I then put it on to Google Onedrive for sharing) this write up would not have been possible. Huge thank you to both! I am attaching links to materials to use as well as the link for the template. After installing these onto my truck, I cleaned the engine bay and it is very well protected now from slush, mud, road grime. Last 3 times I have been under the hood, it only has a small layer of dust on it. Also there are issues with the coil pack bolts rusting and seizing, making plug changes a chore. This should cure that issue as well. I decided to pull all 8 bolts, paint them black and reinstall with some high temp copper anti-seize for added protection.
***These are for any 15-19 trucks, but the ecoboost comes with them already to protect the turbos. These are larger than the OEM aprons, so some eco guys/gals may consider this a worthy mod as well. A couple things to note, be careful drilling into your existing wheel well liners to avoid hitting any wiring harnesses.
Here is the link for the template (it is 6 pages, pages 1-5 is the full template, page 6 is how to put them together:
https://drive.google.com/file/d/1XSG...H-VNbZyTD/view
Materials to be considered:
Rubber:
I used rubber floor runner mat from Menards, but it is now discontinued........
https://www.grainger.com/product/1MT...c28f6771b62a1b
From Lowes, Craftsman truck tool box mat 16x60 item #1053459 model #CMXZBAKD010901
Push-pins:
https://www.grainger.com/product/5RK...!574931183952!
Pictures installed on my truck and @sddesigns You can make the template bigger or smaller depending on how you want it to cover. I have had them on for over 2 months now, they still look perfect! Enjoy!
***These are for any 15-19 trucks, but the ecoboost comes with them already to protect the turbos. These are larger than the OEM aprons, so some eco guys/gals may consider this a worthy mod as well. A couple things to note, be careful drilling into your existing wheel well liners to avoid hitting any wiring harnesses.
Here is the link for the template (it is 6 pages, pages 1-5 is the full template, page 6 is how to put them together:
https://drive.google.com/file/d/1XSG...H-VNbZyTD/view
Materials to be considered:
Rubber:
I used rubber floor runner mat from Menards, but it is now discontinued........
https://www.grainger.com/product/1MT...c28f6771b62a1b
From Lowes, Craftsman truck tool box mat 16x60 item #1053459 model #CMXZBAKD010901
Push-pins:
https://www.grainger.com/product/5RK...!574931183952!
https://www.amazon.com/GOOACC-GRC-01-Automotive-Furniture-8mm-100PCS/dp/B071S8J8NB/ref=sr_1_26?m=AMTG6OI9G435&marketplaceID=ATVPDKIKX0DER&qid=1569081858&s=merchant-items&sr=1-26
Pictures installed on my truck and @sddesigns You can make the template bigger or smaller depending on how you want it to cover. I have had them on for over 2 months now, they still look perfect! Enjoy!
Last edited by Summers22; 04-15-2022 at 08:15 PM.
The following 18 users liked this post by Summers22:
ABF150Fan (10-19-2019),
Bowhunter41 (03-22-2023),
chimmike (10-16-2019),
DeltaNu1142 (11-01-2020),
F150CMH (12-12-2019),
and 13 others liked this post.
Popular Reply
10-15-2019, 10:55 PM
Thats not what I am about. Sharing with the community is more my style. Give more than you take, thats what makes this forum a good place to be.
#2
Gone Golfin
iTrader: (3)
I would have have made up about a 1K of them and offered them for sale... perhaps you may still consider it.
The following users liked this post:
sixpack577 (10-16-2019)
The following 43 users liked this post by Summers22:
03screwon22's (04-15-2022),
2015LariatFX4dude (10-16-2019),
ABF150Fan (10-19-2019),
bamashooter (01-12-2020),
cbbennin (04-29-2021),
and 38 others liked this post.
#4
Gone Golfin
iTrader: (3)
Cool mod but..
I'd bet there are waaaay more people that would rather be able to purchase these at a reasonable price than make them. I didn't suggest you try and get rich selling them...
I'd bet there are waaaay more people that would rather be able to purchase these at a reasonable price than make them. I didn't suggest you try and get rich selling them...
The following 3 users liked this post by idrive:
#5
Super Moderator
Great job collaborating on the project, and even more so on your willingness to share !
Guys like you make this forum great !
#6
Doesn't matter!
Thanks, Jon and great job!
There are a few that were requesting the mod info, @Wanna Ride , @Old64 @RCF .
There are a few that were requesting the mod info, @Wanna Ride , @Old64 @RCF .
Last edited by sddesigns; 10-16-2019 at 06:43 AM.
The following 4 users liked this post by sddesigns:
The following users liked this post:
sddesigns (10-16-2019)
Trending Topics
The following 2 users liked this post by Husker:
Powerlifter405 (07-11-2021),
sddesigns (10-16-2019)
#9
Thank you, I will be making a set!