When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I used a program called Forscan to change said data. http://forscan.org/download.html You need to sign up for the forum and request an extended licence to be able to change the APIM data.
Then I used an OBDLink MX to connect to the the truck. Forscan has a list of compatible hardware. You need a piece of hardware that is able to write to both the HS-CAN and MS-CAN to correctly program the APIM
To turn on the climate quadrant one value needs to change as well as the checksum (last two hex values). If the value goes up you have to add to the checksum and if the value goes down you have to subtract from the checksum.
7D0-04-01 0103 0200 00E2 with climate
7D0-04-01 0103 0201 00E3 without climate
The bold values are what changed. Some of the other values might be different for your set up but the bold values are what you care about.
To add the heated seat buttons.
7D0-01-01 2AAA 0006 00B3 blank
7D0-01-01 2AAA 0006 03B6 heated seat icons
To add the a/c and heated seat buttons.
7D0-01-01 2AAA 0006 00B3 blank
7D0-01-01 2AAA 0006 02B5 heated seat icons
Thanks to flsdiver on another forum http://forum.xda-developers.com/show...6&postcount=69 Changed the As Built Data for the APIM. I used a program called Forscan to change said data. http://forscan.org/download.html You need to sign up for the forum and request an extended licence to be able to change the APIM data. Then I used an OBDLink MX to connect to the the truck. Forscan has a list of compatible hardware. To turn on the climate quadrant one value needs to change as well as the checksum (last two hex values). If the value goes up you have to add to the checksum and if the value goes down you have to subtract from the checksum. 7D0-04-01 0103 0200 00E2 with climate 7D0-04-01 0103 0201 00E3 without climate The bold values are what changed. Some of the other values might be different for your set up but the bold values are what you care about. To add the heated seat buttons. 7D0-04-01 2AAA 0006 00B3 blank 7D0-04-01 2AAA 0006 03B6 heated seat icons Also some of the voice commands work too.
Can you post a picture of your full climate control screen?
Have you looked into removing the heated steering wheel icon? Do you know by any chance which bit it is in the 7D0-04-01 line and whats the checksum?
Thanks
Sorry I had the wrong section for the heated seats. It's 7D0-01-01 I fixed in first post.
No I have not. I would have to compare different vehicles as built data. I think it might be the 2 in the last section first hex that needs to be 0 then subtract 2 for the last value for the checksum.
I used a program called Forscan to change said data. http://forscan.org/download.html You need to sign up for the forum and request an extended licence to be able to change the APIM data.
Then I used an OBDLink MX to connect to the the truck. Forscan has a list of compatible hardware.
To turn on the climate quadrant one value needs to change as well as the checksum (last two hex values). If the value goes up you have to add to the checksum and if the value goes down you have to subtract from the checksum.
7D0-04-01 0103 0200 00E2 with climate
7D0-04-01 0103 0201 00E3 without climate
The bold values are what changed. Some of the other values might be different for your set up but the bold values are what you care about.
To add the heated seat buttons.
7D0-01-01 2AAA 0006 00B3 blank
7D0-01-01 2AAA 0006 03B6 heated seat icons
Also some of the voice commands work too.
So if one was to find a heated Steering wheel from a platinum what values would you change?
05-07-2016, 08:33 AM
How to add Climate to MyFord Touch on XLT also heated seats icons
