Its hard to look through all the post on here but if this has already been addressed if someone could please point me towards the answer.

I bought a set of Anzo smoked headlights for my 2015 F150. I also bought LED bulbs and a conversion kit from 4x4truckleds.com. Got the bulbs installed and went to install the housings. The drivers side lights work great. When I plugged the passenger side housing in the lights worked briefly and then went out. The high beams still work as well as the parking lights. The low beam lights do not work. I thought the issue may be with my LED bulbs or wiring so I put the stock housings back in but same issue. High beams work but low beams do not.

Can anyone offer any suggestions on how to fix this?

Thanks

 

I'd look at the truck side plug to make sure all the pins are lined up correctly and stick out the same as the others. If you have a multi-meter you can also verify voltage at the proper connector.

 

I posted a response in the other thread that you posted this question in too, I agree with the above about checking for voltage but also check the fuse. Other year groups have right and left headlights on a different fuse.

 

Pm 4x4led vendor... couple other guys needed a canbus flicker adaptor for the led either flickering or randomly going out....newer vehicles tend not to play well with aftermarket led