Guys.. I need a big favor
#1
Guys.. I need a big favor
So I placed an order for an MX4 tonneau cover, AMP Research HD Max bed extender, and the necessary spacer kit.. Got (I think) a great deal for all 3, under a grand.. anyway, here's where I'm in a bit of a pickle.. My 18 XLT has a drop i plastic bed liner stock from Ford. It's impossible for me to find the drain holes in the bed, there's no notches, or outlines in the plastic bed liner. I have to drill a hole in the liner to feed the drain hose thru.. so my request is this, if someone could take some measurements in their bed, and let me know where I should drill, that'd be awesome. For example.. maybe it's 14 inches below the rear window, and 6 inches off the rail... you get what I'm saying. I obviously don't want to drill blindly. I'd greatly appreciate it if someone could do that for me! In case it matters, it's an 18 XLT Sport SuperCab with 6.5 bed. Thanks fellas!
#2
Senior Member
Can you drill a pilot hole from under the bed? Upward?
#3
Senior Member
Technically there are no drain holes. Just gaps in the floor to side assembly.
The following users liked this post:
David Jones (01-25-2018)
#4
Senior Member
2 " up from floor 3" from side. One on each side of the front of the bed.
The measurement from the side may be different on your truck with the longer bed
Last edited by msgtord; 01-25-2018 at 10:17 AM. Reason: Add
The following 4 users liked this post by Kingofwylietx:
#6
Senior Member
The following users liked this post:
Kingofwylietx (01-25-2018)
#7
Senior Member
Oh, those, I bought an extra set to drill for my BAKflip, and never used or installed drain hoses. Never had water.
Trending Topics
#9
Hey Buck, before you do that, please check out my drain mod and see what you think. no glue or clamps, just a couple fittings from the home store.
Last edited by kmac1036; 01-25-2018 at 11:40 AM.
The following 2 users liked this post by kmac1036:
apMechorse (04-10-2021),
msgtord (01-25-2018)