wwarren20

Just curious if the wood trim above the glove box from a Lariat and higher trim will fit in an XL/XLT that only has the rubber trim mat (non-leather stitched dash assembly). Reason I asked, is I recently changed all 4 door panels out from a Lariat and it has the olive wood on the doors and thought the glove box wood trim would be a nice compliment. Has anyone done this? Cutting involved? Thanks


from this

to this

HalfPirate

Watch this video, and you'll be able to see how it attaches and figure out what is different with yours:
The cabin air filter is behind it, and every time I remove it I think it's going to break. It's very fragile.

wwarren20

That video cleared up a lot of questions. Thanks.

wwarren20

Lariat Glove Box Trim Area

XLT Glove Box Trim Area

Looks like the XLT is narrower/shorter in height, missing the top row of 3 clip holes. I wonder if I purchased a used wood trim piece on ebay or similar and but the height down if the bottom 2 clip points would hold it enough....

edit: The lower rubber shelf mat looks to fit no problem.

JoeInPI

If not (the KR panel I ordered was shorter than the XLT panel), You can buy the woodgrain vinyl to match. I did a different color, but mine has been on for 4 years...

https://www.f150forum.com/f78/joes-2...6/#post6241106