Glove Box
#1
Glove Box
I noticed my glove box does not close properly it appears to be warped?
I contacted my dealer, my friend. and he has ordered a new one, has anyone else had this issue!
DRIVE ON!
Art
I contacted my dealer, my friend. and he has ordered a new one, has anyone else had this issue!
DRIVE ON!
Art
#2
Mine does the same thing. I have to reach over and push the side closest over to me in a couple of times to get it to shut. Cheap, thin plastic. However, I love the center console....so it's a give and take for me
#5
Senior Member
Pics or it didn't happen.
#6
Junior Member
Mines the same way. Been that way since new. I have to reach over and push drivers side in and then it appears to look ok. So I haven't taken it in yet. Plan on first oil change letting them know about it.
#7
My glove box was also messed up but I fixed it. Noticed on the side nearest to the passenger door there was a plastic piece hanging out at an angle once opened. That piece is an alignment arm that tracks the glove box straight. Mine was not installed properly and was not in it's track. With the glove box open there are two bump stops that stop the door from falling open, press those in on either side and the box will drop to the floor. Then place that alignment bar through its proper holes and resnap it back on the side of the box and close. That's what fixed mine
The following users liked this post:
TerryROC (08-20-2015)
Trending Topics
The following users liked this post:
victimofvibration (05-13-2016)
#9
Member
My glove box was also messed up but I fixed it. Noticed on the side nearest to the passenger door there was a plastic piece hanging out at an angle once opened. That piece is an alignment arm that tracks the glove box straight. Mine was not installed properly and was not in it's track. With the glove box open there are two bump stops that stop the door from falling open, press those in on either side and the box will drop to the floor. Then place that alignment bar through its proper holes and resnap it back on the side of the box and close. That's what fixed mine