I added the ford module KN1Z-19A361-A to my 2019 F150 XLT which gave me remote start by doing ‘lock-unlock-lock’ on my key fob.

I want to enable global windows with forscan but am concerned with it interfering with the remote start module since it also uses a ‘lock-unlock lock-unlock hold’ to action the windows.

Am i going to trigger remote start everytime i try to do the windows? Or do i have to quickly do this combo and it will know to do the windows instead of the remote start? There are quite a few entries to tweak in forscan so i want to make sure this will work before i do it.

thanks!

 

or the global windows it's "unlock-unlock hold" for down and "lock hold" for up.

 

I am not sure, but I would think not. To put the windows down you select the unlock button once then again and hold it until the windows go down. To put the windows up you hit the lock once then again and hold it until the windows go up.

If the remote start has you hit lock then unlock then lock again I doubt it will bother anything.

 

thanks, the forscan google spreadsheet must have the incorrect button procedure listed then i will give it a go and report back.

 

The spread sheet is not really wrong as much as really not clear. It took me a few times to figure out how to use them.

 

Just flashed it, works great and no inference with the remote start.