Any help would be greatly appreciated. I have tried to enable global window in my 2019 stx. Doesn't seem to matter what i do it wont work any suggestions ?

 

You should input the address values instead of enable disable.

There are I believe 3 modules, PDM, DDM, BCM (passenger door/driver door/body control module).

To lower window, press unlock -release. Press again and hold for 8 seconds. Window will begin to lower.
To raise, press and hold lock for 8 seconds. No double press necessary to raise window.
At any time during roll up/roll down, you can press a button again to interrupt the operation and window will remain in a partially open condition.

 

Do you have auto up/down windows? If not it won't work anyway.

 

Guys, thanks for the advice. Turns out I was using the wrong sequence to activate the windows. The instructions I had was to hit Lock Unlock Lock Unlock and hold unlock.

 

I thought that was the secret code for automatic unlock for SuperMario

 

Glad you got it sorted out. Your instructions sound like bits and pieces from a few things.
Locking first is step #1 for remote start.

Windows is easier but takes longer due the the 8 second wait time.