Brozum01

Loading the truck actually lowers your caster angle, not increases it

Bluegrass

Same stuff over and over.
I fully explain what the effect was, what was measured and what was done and the final result, and someone is bound to say it's wrong right out of an alignment shop with the latest Rack equipment.
.
Same thing happened with battery replacement thread; I was called a liar by insults after explaining the technical operation of the charge and control system in simple terms for those who did not know and could understand.
.
Same thing with an oil collector thread. The Ford website PDF shows the photos of the part that will fit the 2018 5L and still the same thing again. I have no idea if some other computer comes up with old info and the person runs with it and and tries to argue the point, from it.
The one shown in a >>reply photo<< (shown on another thread) NOT THE SAME ONE.
The part number may be the same but with a different last letter designation. I don't know.
If one looks closely; the installation PDF is different and the mounting is on the front of the valve cover and is different in shape and size.
The outlet hose goes to the intake tube straight across. That tube is supplied new in the kit.
For this I am told I'm wrong again.
You people have to stop being so radical on this forum.
I am not going to argue with anyone because I have nothing to prove or gain otherwise and stick to what I know is correct for what I have, and what I do.
And I do not follow a few board leaders on anything.

acdii

Well, you know, Internet Arm Chair Experts abound. Same could be said about Death Wobble. Many Many have had it cured, and yet were told they were wrong. SMDH. The fix for DW on Superduties is increased Caster. It's been proven to work and many have actually explained, IN DETAIL how it corrects the issue, yet, there are experts out there who say its wrong.

Same with this thread. Not all EPAS fall under the same category. Some issues are fixed by doing a proper wheel alignment by a professional alignment mechanic whose sole job it is to do alignments and know his schiznit. Some are software, and some are just a bad EPAS that can't be fixed.

Bluegrass

Thank you for that conformation.
I have a long electrical background as well as mechanical level and troubleshooting but still there are experts with a high level of ignorance will deny it.
Many replies show a very shallow level of thinking before the mouth runs.
It called being too cocksure of ones self.