Hey guys, probably dumb question but I'm trying to figure out Forscan live data interface, I cannot get it to work or do anything. IE plugging in exhaust and intake banks for VCT and pressing play does nothing same with imrc checking etc, nothing active shows in table and oscilloscope just shows a flat line, no change or anything regardless of revs or driving. And everything also says "nofault" so I'm not sure if I'm supposed to change something manually but not one bit of info online or a video that shows what to do. Forscan forum is still shutdown years later can't access as it won't allow new registers. I'm having a weird idle issue that surges and fluctuates on cold start almost like its cammed and loping away kinda and sometimes slight random idle shudder. No codes or anything, but also had other Fords where the solenoids failed with no codes. I'm trying to poke around and see what issue may be, gas mileage is terrible which was main symptom with solenoids on other truck (all 4, Gen 3 Coyote).

Maybe I'm selecting wrong thing? When you search in pids like for VCT intake shows a bunch including bank 1 and 2 and like half dozen other VCT intake things. But when added to table and playing to start, does nothing.