I need some help with Forscan and Anzo switchbacks. I read the tutorial on forescan but still have some questions
I want the anzo switch backs to have the white boarder ring to be on when i drive and flash amber when the turn signal is on. What parameters do i need to change in forscan

I have a 2015 f-150 lariat with halogens headlights if that matters.

Any help would be appreciated

 

DRL - Anzo switchback white halo BCM 726-45-01 xxxx 7Fxx xxxx 726-26-02 x1xx xxxx xxxx 726-50-01 10xx

 

What are these command for?

 

can somebody tell me if I just installed the morimoto XB's on my 2019, will this code keep the outer LED's all white for my DRL? currently I have an orange top and the rest is white. I'm assuming due to my previous settings from switching to LED's. will this work to allow the orange to only show when the signal is on? I had factory halogen

<!--td {border: 1px solid #ccc;}br {mso-data-placement:same-cell;}--> DRL - Anzo switchback white halo BCM 726-45-01 xxxx 7Fxx xxxx 726-26-02 x1xx xxxx xxxx 726-50-01 10xx

 

[QUOTE=davidvi;6525312]I need some help with Forscan and Anzo switchbacks. I read the tutorial on forescan but still have some questions
I want the anzo switch backs to have the white boarder ring to be on when i drive and flash amber when the turn signal is on. What parameters do i need to change in forscan

Have you found a solution? If so send me the codes please.