Ford Perimeter Plus Install
#1
Senior Member
Thread Starter
Ford Perimeter Plus Install
I ordered the perimeter plus from Tasca ford. I installed it and it doesn't seem to be working. I have searched and most websites say it is plug and play, but others say it has to be dealer activated. I am unable to download the installation instructions from the websites listed on the box as they either don't work, or are dealer login only. I have it plugged in and mounted properly, I just would like someone who has installed the perimeter plus to chime in and let me know if they had to have it activated. Attached is a picture of the box with the part number, and the instructions on how to get the instructions.
#3
I installed the same in my 16 XLT last week. It was plug and play. No configuration required. The only thing I needed to do was turn down the sensitivity dial slightly, so that it wouldn't go into full alarm mode after a light hit on the skin of the truck.
#6
One Clean Machine
iTrader: (5)
Does this kit, consist of a new overhead console, and a module?
#7
I installed the shock sensor on my 2016 and it was plug and play to the factory alarm. But this looks like a complete base alarm with remotes. You're signature says you have a 2013, you might want to see what folks in that forum say.
Last edited by tbinmd; 10-16-2016 at 11:39 PM.
Trending Topics
The following users liked this post:
Toddman38 (10-16-2016)
#9
One Clean Machine
iTrader: (5)