I bought an aftermarket raptor style bumper for my 2015 Ford f150. I mounted it and have watched a million videos and read a 1000 forums and I still cannot figure out how to properly install my fog lights. Every video I find is of ford raptors that make it simple and have the wires that are pre set for aftermarket parts. Can someone please tell me step by step what I need to do to get them to work on a 2015 ford f150. Please and thank you!!!

 

Just bolt them up and attach to the factory fog wiring or did you not have factory wiring to begin with? You can get a 9006 pigtail to connect aftermarket fogs to the factory 9006 plug.

 

I do have factory wiring but the harness is different and has an additional blue wire on one side and an orange on the other.

 

Can you post a pic of the wiring. The fog lights should just be 2 wires each. A ground and a positive. If they have a third function such as DRL or Turn Signal, they would have an additional positive wire, otherwise just 2 wires each. Get those 9006 pigtails and that'll allow them to plug into your factory wiring and work with your factory switch.

 

The fog lights have the ability to turn on when making a turn. It's called cornering present. If turning left the left fog light will come on and the right side stays off. This may be the reason for the extra wire.