Fix the inaccurate MPG display in 2 minutes!
07-20-2018, 06:48 PM
#41
Senior Member
Thread Starter
The following 2 users liked this post by Kingofwylietx:
digitaltrucker (07-22-2018),
rotorbudd (08-25-2018)
07-20-2018, 07:03 PM
#42
F250>F150
iTrader: (2)
Dang. I was wrong about what that meant. I can't get this to pop up on a 2018 Plat. I saw in the other forum someone did it on a 2018 502A which should be the same as mine. Just to recap: I'm getting in the truck, shutting the door, holding "OK" on the steering wheel, pressing the Start button, waiting for "Accessory Mode" to pop up, when it does I push the brake and press start, all while holding "OK". I'm just getting the regular screen. Does the productivity screen have to be on a certain screen? IE MPG screen, digital speedometer, tire pressure, etc?
07-20-2018, 07:14 PM
#43
Senior Member
Thanks for posting this!
I figured there was some way to do this. My '02 BMW had a similar way to insert a correction figure to correct the mpg reading.
Rock on!
I figured there was some way to do this. My '02 BMW had a similar way to insert a correction figure to correct the mpg reading.
Rock on!
07-20-2018, 07:34 PM
#44
Old Fart
Dang. I was wrong about what that meant. I can't get this to pop up on a 2018 Plat. I saw in the other forum someone did it on a 2018 502A which should be the same as mine. Just to recap: I'm getting in the truck, shutting the door, holding "OK" on the steering wheel, pressing the Start button, waiting for "Accessory Mode" to pop up, when it does I push the brake and press start, all while holding "OK". I'm just getting the regular screen. Does the productivity screen have to be on a certain screen? IE MPG screen, digital speedometer, tire pressure, etc?
07-20-2018, 08:31 PM
#45
Dang. I was wrong about what that meant. I can't get this to pop up on a 2018 Plat. I saw in the other forum someone did it on a 2018 502A which should be the same as mine. Just to recap: I'm getting in the truck, shutting the door, holding "OK" on the steering wheel, pressing the Start button, waiting for "Accessory Mode" to pop up, when it does I push the brake and press start, all while holding "OK". I'm just getting the regular screen. Does the productivity screen have to be on a certain screen? IE MPG screen, digital speedometer, tire pressure, etc?
Release the OK when the accessory screen comes up, the gauges should go into a buzzing state, then press brake and start. Ran into this earlier and could not get it to work, then for the heck of it released the OK after teh accessory screen popped and it worked.
The following users liked this post:
BoozeDaily (07-20-2018)
07-20-2018, 09:39 PM
#47
Old Fart
Skip the start button without starting and go right to starting the vehicle. Pops right up. Couldn't get into the menu any other way.
The following 4 users liked this post by remltr:
07-20-2018, 10:38 PM
#50